Blogging Roller

When I first started with BlogQL, I used create-react-app (CRA) to generate the code. It worked well and allowed me to focus on learning React, but eventually I found it too constraining. I wanted to learn the underlying technologies of WebPack and Babel and CRA tucks those away. It took some time, but was able to remove CRA and replace it with my own WebPack and Babel setup.

If I had to start again, I might consider using Vite, which is growing in popularity as an alternative to WebPack.

This is part of a series of short posts about BlogQL:  https://github.com/snoopdave/blogql.